hard drive recovery equipment table

hard drive table

touchdown adjustment is utilized to discover most extreme energy to apply this to the radiator component for every head on a drive

This done by applying energy to heads until they most extreme or passable force has been connected

The head to media contact happens just amid alignment process

The head shouldn’t reach media in typical read-compose –in request not to enlist this anxiety in the servo inclination

The aftereffect of this check will be spared in 0x46 document

This check id is 0x6f

In the first place gather all data and information important to the check

The evaluated testing time per head is 2 minutes

The quantity of testing zones is characterized in 0x6f

Its grouping

1-get check information from DATA_BUFFER

2-run preamp pick up alignment and 2tjog test

3-set compose support to zero-then do a compose chamber head part (CHS) to gather reference data

4-??aggregate servo flex bias>>what about it?

The head draws near to the media-then head arm strays from the track

So servo flex predisposition circuit expands measure of current to take head arm back to craved track

5-spare results to document id 0x96 and 0x46

However, be product that all data and capacity will be last tidied up-overhaul test information in 0x96 and 0x46 with the greatest read/compose power settings for every head/zone

At that point element fly stature (DFH) can be execut

One thought on “hard drive recovery equipment table”

  1. You really make it seem so easy with your presentation but I find this matter
    to be actually something that I think I
    would never understand. It seems too complex and very broad for me.
    I am looking forward for your next post, I will try to get the hang of
    it!

Leave a Reply

Your email address will not be published. Required fields are marked *